MOUNTING
MINIATURE MILITARY RIBBONS
 | |  | |  | |  | |  | |  |
R
PIN & CLUTCH BACK MOUNTING: ( 3/8" long brass pins )
*STANDARD MOUNTING METHOD- RECOMMENDED FOR USE WITH THICK
MATERIALS AND HEAVY USE AREAS. WILL REQUIRE / LEAVE TWO or THREE
SMALL HOLES (depending on the ribbon rack size) IN THE MATERIAL BEING MOUNTED
TO. BRASS CLUTCH BACKS PRESS ON THE PINS FROM INSIDE THE
MATERIAL BEING MOUNTED TO.
*STANDARD MOUNTING METHOD- RECOMMENDED FOR USE WITH THICK
MATERIALS AND HEAVY USE AREAS. WILL REQUIRE / LEAVE TWO or THREE
SMALL HOLES (depending on the ribbon rack size) IN THE MATERIAL BEING MOUNTED
TO. BRASS CLUTCH BACKS PRESS ON THE PINS FROM INSIDE THE
MATERIAL BEING MOUNTED TO.
MAGNETIC BACK MOUNTING:
*QUICK / EASY MOUNTING METHOD- RECOMMENDED FOR USE WITH
THINNER MATERIAL SUCH AS BALL CAPS & SHIRTS (SINGLE LAYER). THIS
METHOD DOES NOT MAKE HOLES IN THE MATERIAL. WIPE THE MOUNTING
FACES CLEAN BEFORE ATTACHMENT AND ONCE REMOVED YOU'LL NEVER
KNOW THEY WERE THERE.
*NOTE RECOMMENDED FOR HEAVY USE SUCH AS LEATHER VESTS
(MOTORCYCLE RIDING VESTS) DUE TO HIGH WIND CONDITIONS AND
THE THICKER MATERIAL WILL DEGRADE THE 'PULL FORCE' OF THE
MAGNET WHICH MAY RESULT IN SEPARATION FROM THE BACKING AND
LOSS OF YOUR MINIATURE RIBBONS.
- MAGNET SAFETY NOTICE- READ BEFORE PURCHASE !
*QUICK / EASY MOUNTING METHOD- RECOMMENDED FOR USE WITH
THINNER MATERIAL SUCH AS BALL CAPS & SHIRTS (SINGLE LAYER). THIS
METHOD DOES NOT MAKE HOLES IN THE MATERIAL. WIPE THE MOUNTING
FACES CLEAN BEFORE ATTACHMENT AND ONCE REMOVED YOU'LL NEVER
KNOW THEY WERE THERE.
*NOTE RECOMMENDED FOR HEAVY USE SUCH AS LEATHER VESTS
(MOTORCYCLE RIDING VESTS) DUE TO HIGH WIND CONDITIONS AND
THE THICKER MATERIAL WILL DEGRADE THE 'PULL FORCE' OF THE
MAGNET WHICH MAY RESULT IN SEPARATION FROM THE BACKING AND
LOSS OF YOUR MINIATURE RIBBONS.
- MAGNET SAFETY NOTICE- READ BEFORE PURCHASE !
